Inlays for JK Design Orca v2 [Ring Silencer]
Deepen sound, silence the ring, and add a pop of color to your Orca.
- Tang inlay: 2-piece ball & socket construction inlay snaps into place around the tang cutout to achieve an identical surface finish on both sides of the tang.
- Optional speed channel inlays deepen sound and silence the ring.
- Can be popped in with your thumb, and are removable so you can swap out colors at any time.
- In total, the mods weight only weigh 0.031 oz so they won't affect the balance. (Speed channel inlays: 0.022 oz / Tang inlays: 0.004 oz / Pivot Plugs: 0.005 oz)
- Secure fit: won't fall out on hard drops.
Assembly Instructions
Product Description
Deepen sound and silence the ring of your JK Design Orca v2 balisong with these Zippy inlays. This mod consists of tang inlays, as well as optional speed channel inserts and "pivot plugs" which fill the bores at the base of the handles. The inlays are made in-house from a shatter-proof polyurethane and won't pop out on drops. Please watch the assembly video linked above when installing this product, as there is a special technique.
Features
Assembly Instructions
Spread the handles 90 degrees apart so you can access the tang cutout. Firmly push in the thicker "socket" tang insert into the tang cutout. Flip the balisong over and then align the "socket" insert with the tang cutout and gently push it in. Then, push both sides of the tang insert together simultaneously with your fingers until they snap together and are each seated flush with the surface of the blade. Note that the fit is very tight and it will take moderate force to apply this procedure correctly.
Disclaimer
This product listing is for the blade tang inlay. Optional "speed channel" handle inlays and "pivot plugs" can be added to fill the holes in the handle.