Skip to product information
1 of 17

Geof Dumas Ex10/11 Extensions

Add length, jimping, and protect your handles from hard drops.

Regular price $29.00 USD
Regular price Sale price $29.00 USD
Sale Sold out
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Meta Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa
  • Assembly Instructions

    Product Description

    Handle extensions designed for the Geof Dumas Ex10 and Ex11 clip onto the Titanium skeletonized spacers (or Kuski barrels). The extensions protect the handles from drops while adding a bit of length. They are made of shatter-proof polyurethane and offer positive jimping with adjustable weights.

    Features

    • Extends handles from 5.50" to 5.63".
    • Shatter-proof extensions protect your handles from hard drops.
    • Positive jimping for extra grip on ladders and chokers.
    • Adjust the balance by adding or removing tungsten weights in the extensions. Each extension holds up to 2x removable weights for the handle-bias lovers out there.
    • Adds a slight handle bias due to the added mass of the extensions: a pair of two extensions adds 0.08 oz to the balisong, and up to 0.164 oz total with all tungsten weights installed.
    • Compatible with the Titanium skeletonized spacers or Kuski barrels (4.46mm diameter.
    • Handle Inlays sold separately

    Recommended Balance Configurations

    My preferred balance configuration is with the extensions and no tungsten weights. Tungsten weights are included for folks to experiment with different balanced, and for folks who enjoy a lot of momentum and end-weight.

    Assembly Instructions

    Use a T8 torx driver to unscrew the spacer screws, and slide out the Titanium spacer. Press the Zippy extension into the skeletonized Titanium spacer and slide the spacer back in; you may need to gently push the handles apart to enable to enable the extension "pins" clearance. If using Kuski barrels, snap two Kuski barrels into each barrel slot of the Zippy extension and then insert the spacer. Align the Titanium spacer and extension with the handles, ensure the handles are pressed flush against the spacer and extension, and then retighten the spacer screws. Do not overtighten the spacer screws, or you risk stripping the threads.