Bite Handle Markers [4 or 6-pack]
Couldn't load pickup availability
These custom-made Zippy bite markers are designed and manufactured in house from a rubbery polyurethane and are virtually indestructible.
-Internal ridges to grip the jimping on your Zippy Balisongs, so they don't slide off during drops.
-Will fit most balisongs with ~0.5 in handle thickness.
-Low friction exterior - won't interfere with flips.
-95A shore hardness: flexible and rubbery (Red is stretchier at 85A).
-330-660% elongation and abrasion resistant--extremely durable.
(This is a 4-or 6-pack of bite markers. Each Zippy Balisong is shipped with one bite marker)
These Zippy bite markers have been tested to fit on the following balisongs from other makers (note that the red bite markers are stretchier than the other colors and therefore have a slightly different fit, described below):
Atropos Demon & Demon 2 w/Ti Channel Handles--Fits all Atropos blade styles with Ti handles.
Atropos Fortress 2 SPY
Atropos Kirat BRO
Atropos Kratos Black Mood--Red fits, all other colors will not fit.
Atropos Smoke BRO (New and old versions)--Red fits, other colors will only fit with stretching, which will make the markers loose on other balis.
Atropos Razor Lite CF--Will not fit.
BBFirefly Firefly--Red fits, but very tightly. Will stretch out the bite marker and make it loose on other balis. Other colors will not fit.
Biegler Archon
BiteBlades Titan--All colors fits, but very tightly. Will stretch out the bite marker and make it loose on other balis.
Black Balisong Channel Da'Purge v1 and v2
Black Balisong Diet Rebola
Black Balisong Reaper/Segadora
Black Balisong Valkyrie
Black Balisong Xolo
BM51--All colors fit over pocket clip, but are too loose without pocket clip.
BM51 w/ Flytanium V4 scales--All colors fit over pocket clip, but are too loose without pocket clip.
BM51 w/ Flytanium wood inlaid scales
Boker Papillon
Boker Plus
Boker Tactical
Bradley Kimura VII--Will not fit.
Bradley Kimura with CF scales
Brous Blackcell
BRS Aluminum Barebones
BRS Alpha Beast (Channel)
BRS Replicant--Red fits, but very tightly. Will stretch out the bite marker and make it loose on other balis. Other colors will not fit.
BRS Replicant w/ Squiggle Scales on brass barrels--All colors fit, but very tightly. Will stretch out the bite marker and make it loose on other balis.
Canto Angler--All colors fit, but very tightly. Will stretch out the bite marker and make it loose on other balis.
Cold Steel FGX--Will not fit.
Ceroni Ti Integralis II
Ceroni Trinidad Scorpion
EOS Serpent--Will not fit.
EOS Trident
EPS Atlas
Fellowship Blades Medusa
Fellowship Blades Pit Viper--Will not fit.
FLS Liminal
Flytanium Talisong Z
Fox Blackfox--Will not fit.
Glidr Antarctic
Glidr Arctic
Glidr Original 4
Grind Tactical Balitac--Will not fit.
Heed SeaKnight
Heibel Menace
Heibel Sapient--Will not fit.
Hom CF Basilisk-R--Red fits, all other colors will not fit.
Hom Prodigy (Mod. C)
Jimpy Sentinel--All colors fit except Red, which is loose.
JK Designs Embargo—All colors fit but will stretch out the bite marker and make it loose on other Bali’s.
JK Designs Orca
Kershaw Lucha--All colors fit except Red, which is loose.
Kershaw Lucha w/ Flytanium Ti handles--All colors fit except Red, which is loose.
Kershaw Lucha with Flytanium aluminum handles--Red fits, all other colors will not fit.
Kershaw Lucha w/Zippy Handles
Kershaw Lucha w/Zippy Spacers
LDY Sirius V1 and V2
LDY Vixen
Lovins Strix Custom
MachineWise Maryn Lite
MachineWise Maryn Ti
MachineWise Prysma
MachineWise Serif
Mantis Thistle
Maxace Obsidian--Will not fit.
Maxace Obsidian-S, with or without pocket clip--Will not fit.
Maxace Serpent Striker II, with or without pocket clip
Maxace Pelican-M--Will not fit.
Maxace Pian--Will not fit.
Microtech Tachyon II & III
Nabalis G10
Nabalis Morse
Nabalis Vulp
NDK (P) Oni--Red fits, all other colors will not fit.
NRB Doosh
NRB Konig
NRB Nemesis—Fit loosely but don't fall off when flipping.
NRB Trapcode
NRB Turbocast--Too loose
NRB Vortex V1
Prince Customs SYN—Too loose
Ryworx Omeme
Ryworx Setsuna
Squiddy (all variants)
Squid Kraken V2.5
Squid Mako V3, V4, V4.5
Squid Nautilus
Squidtrainer V3.5
Squid Triton V2
Squid Tsunami--All colors fit except Red, which is a loose fit.
Svix Zephyr
Taylor Mania Solidsong
Terrain 365 Invictus Bali-Ti--Will not fit.
Tay Flipper--Red fits, but very tightly. Will stretch out the bite marker and make it loose on other balis. Other colors will not fit.
Zieba Pro EDC--Will not fit.
Zippy Cycloid v1 and v1.6
Zippy Cycloid v2--Red (stretchier) fits, the other colors will not fit.
Zippy Diode
Zippy Zipper v1 and v2
![Bite Handle Markers [4 or 6-pack]](http://cdn.shopify.com/s/files/1/0607/5410/0473/products/image_32b4d19e-080c-45c9-9c29-159329c18758.heic?v=1658955748&width=1445)
![Bite Handle Markers [4 or 6-pack]](http://cdn.shopify.com/s/files/1/0607/5410/0473/products/image_ea8d719e-9209-4c94-a78c-232517b07464.heic?v=1662654482&width=1445)
![Bite Handle Markers [4 or 6-pack]](http://cdn.shopify.com/s/files/1/0607/5410/0473/products/bite4_840ede11-b5ff-434d-9609-dec40797992d.jpg?v=1662654482&width=1445)
![Bite Handle Markers [4 or 6-pack]](http://cdn.shopify.com/s/files/1/0607/5410/0473/products/image_81215196-3c3f-4da7-8c4d-6de6b0f96530.jpg?v=1662654482&width=1445)
![Bite Handle Markers [4 or 6-pack]](http://cdn.shopify.com/s/files/1/0607/5410/0473/products/bitezoom_dcc3293c-6f24-451e-8f59-dde2ba7c44ed.jpg?v=1662654482&width=1445)
![Bite Handle Markers [4 or 6-pack]](http://cdn.shopify.com/s/files/1/0607/5410/0473/products/image_a886b6ec-5d4b-4ddc-8546-4d98b650b382.heic?v=1662654482&width=1445)
![Bite Handle Markers [4 or 6-pack]](http://cdn.shopify.com/s/files/1/0607/5410/0473/products/bite1_bc106d8a-6a43-4517-a70d-4a2628cdf041.jpg?v=1662654482&width=1445)
![Bite Handle Markers [4 or 6-pack]](http://cdn.shopify.com/s/files/1/0607/5410/0473/products/bitemarkernice_8c52c900-ea39-4869-a626-994564051db1.jpg?v=1662654482&width=1445)
![Bite Handle Markers [4 or 6-pack]](http://cdn.shopify.com/s/files/1/0607/5410/0473/products/image_712617f3-e6fd-4765-a1b9-f18c3ed22f61.heic?v=1662654482&width=1445)
Balisong Information
Specs:
How do I maintain my Zippy?
For disassembly, tuning, and balance adjustment information, please see the FAQ. All Zippy Balisongs ship with weights installed, but are easily adjustable for whichever balance profile you prefer.
What does the Balisong ship with?
International shipping
Zippy ships international, but the buyer accepts the risk for lost, damaged, or seized packages-it is the customer's responsibility to comply with all local laws and regulations when importing and using this product. For questions and concerns (looking at you, Aussies), please contact me at zippybalisong@gmail.com. Shipping to AUS is done in 2 packages, and you will need to assemble the trainer following these instructions:
For EU customers, be advised that customs will apply a VAT fee of approximately 30€ for importing this product.
Warranty, Returns, and Shipping
Disclaimer
Zippy modifications are aftermarket mods that the customer installs themselves. The mods do not include a knife or trainer, and it is the customer's responsibility to follow the assembly instructions (listed on each product page) when installing the aftermarket Zippy mods. If you have any questions during the assembly process whatsoever, do not hesitate to contact me for clarification (zippybalisong@gmail.com). Improper installation can lead to property damage and injury, and the onus is on the customer to abide by safe practices when assembling and using these products--any injuries or damage to the customer's knife/trainer or other property during the assembly process or use of the balisong is the responsibility of the customer. Balisongs (whether trainers or knives with a sharp edge) carry inherent risks, and it is the customer's responsibility to operate all Zippy-modded balisongs in a safe and responsible manner to themselves, and everyone around them, including pets and property. To ensure safety, the customer must verify proper hardware tightness (including threadlock and installation), structural integrity of the balisong and all installed mods, and function of the balisong and all modifications prior to each use. It is the customer's responsibility to read the entire product description for each Zippy product they use to ensure they are using the product within recommended guidelines (for example, per the product desccription: the ZippyLucha should not be used at a functional work knife or manipulated over hard surfaces such as concrete). It is the customer's responsibility to comply with all international, federal, and local laws and regulations when importing and using these products.
Zippers, Cycloids, and Diode's are not real knives. These products are balisong trainers, not real knives. The blades are made of plastic, weighted with tungsten. This is not a weapon or a cutting tool and is used for recreation and training only. It is the customer's responsibility to comply with all international, federal, and local laws and regulations when importing and using these products.
You agree to not copy, modify, creative derivate works of, or reverse engineer, in whole, or in part, for any purpose: Zippy's website, products, and intellectual property, including concepts, prototypes, all products, designs, text, and photographs.
Warranty
If part of the Zippy breaks within 1 year of purchase and it affects functionality, I will replace it for free. Contact me at zippybalisong@gmail.com
In order to qualify for this policy, the issue must affect the function of the balisong. Normal wear and tear (including scratches and dings caused by repeated impact) is not covered by this warranty unless it affects the functionality of the balisong or I determine it to be the result of a manufacturing defect. In order to reduce cost for the customer, the Diode is not covered under the Zippy Warranty. Replacement Diode parts can be purchased here.
Worn M2 x 0.4mm nylock nuts are consumables and should be replaced from time to time if you disassemble frequently--these are not covered by the warranty.
Returns
I do not accept returns or refunds. All orders are final. That may be a bummer, but I am a one-man operation and returns are far too time consuming and costly to deal with. I appreciate you supporting my small business.
My package hasn't arrived, or my package is lost; what should I do?
Noooooo! Don't panic yet. So far I've never actually had a package get lost in the mail, although delays with USPS aren't unheard of, especially if the shipping is international. If you're a US-customer and your package is lost in the mail, appears lost in the mail, or was marked delivered but wasn't actually delivered, call the USPS immediately (1-800-275-8777). The faster they get on the case, the more likely you'll reach a timely resolution and get your Zippy ASAP. You can email me about it, but once I ship it out, I don't have access to any additional information that you don't--I'm just going to refer you to call the shipping carrier for resolution.
If you are an international customer and your package hasn't arrived yet, contact your local postal service that interfaces with USPS to evaluate the situation--worst case scenario you may need to reach out to customs to see if your package made it through or was seized. It is the customer's responsibility to comply with all local laws and regulations when importing my products.
Hopefully your package is just delayed (this has always been the case historically when a package appears lost), but if it is actually lost in the mail, I'm very sorry. Believe it or not, it's just as heartbreaking for me as it is for you, since I make every balisong myself and put a lot of love into each one. Unfortunately, I am unable to take responsibility for packages that get lost in the mail (or seized by customs). I offer a variety of shipping options which have different levels of pricing and reliability/risk, and it's up to you to choose what is best for you. I am unable to replace lost packages for free, since each product takes me a considerable amount of time and financial investment to make; I'm not a big Amazon company that manufactures their stuff overseas. Thank you for understanding.
International Shipping
Zippy ships international, but the buyer accepts the risk for lost, damaged, or seized packages-it is the customer's responsibility to comply with all local laws and regulations when importing and using this product. For questions and concerns (looking at you, Aussies), please contact me at zippybalisong@gmail.com. If the Zippy is shipped in 2 packages, you will need to assemble the trainer following these instructions:
For EU customers, be advised that customs will apply a VAT fee of approximately 30€ for importing products that exceed 100€. This is subject to change depending on up-to-date EU regulations: it is your responsibility to verify this at the time of your purchase.
Privacy Policy
When purchasing products, you agree to provide accurate information (name, contact method such as email, address, credit/debit card information, and other information. Zippy Balisong reserves the right to request identification following payment to verify your identity and prevent fraud. Zippy Balisong will not sell your personal information to third parties. Zippy Balisong will not share your personal information with third parties without your permission except in response to inquiries by law enforcement and government agencies, or if I have reason to believe your use of the website and purchase of products is for an unlawful purpose. These cases that do not require your consent to share data consist of: court order, a subpoena, legal process, governmental request, or to investigate fraud.
Zippy Trainers are not real knives
Zippers, Cycloids, and Diode's are not real knives. These products are balisong trainers, not real knives. The blades are made of plastic, weighted with tungsten. This is not a weapon or a cutting tool and is used for recreation and training only. It is the customer's responsibility to comply with all local laws and regulations when importing and using this product.